Hydranautics SWC5-LD
Kami adalah importir distributor agen dan supplier Hydranautics SWC5-LD RO Membrane terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik
Spesifikasi Hydranautics Membrane
· Active Area: 400 square feet
· Operating Pressure: 800PSI
· Capacity: 9,000GPD
· Rejection: 99.8%
· Membrane Type: Low Fouling Thin Film Composite
Configuration: Low Fouling Spiral Wound
Membrane Polymer: Composite Polyamide
Feed Spacer: 34 mil (0.864 mm) with biostatic agent
Application Data
Maximum Applied Pressure: 1200 psig (8.27 MPa)
Maximum Chlorine Concentration: < 0.1 PPM
Maximum Operating Temperature: 113 oF (45 oC)
pH Range, Continuous (Cleaning): 2-11 (1-13)*
Maximum Feedwater Turbidity: 1.0 NTU
Maximum Feedwater SDI (15 mins): 5.0
Maximum Feed Flow: 75 GPM (17.0 m3/h)
Minimum Ratio of Concentrate to
Permeate Flow for any Element: 5:1
Maximum Pressure Drop for Each Element: 10 psi
* The limitations shown here are for general use. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail on operation limits, cleaning pH, and cleaning temperatures.
Test Conditions
The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:
32,000 ppm NaCl
800 psi (5.5 MPa) Applied Pressure
77 oF (25 oC) Operating Temperature
10% Permeate Recovery
6.5 - 7.0 pH Range
Untuk permintaan penawaran Hydranautics SWC5-LD silahkan hubungi
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01
Jl.Canadian Broadway
Pergudangan Commpark – Kotawisata – Cibubur
Kantor : +6221 22962668
Mobile : 081385066789
Email : sales@profilterindonesia.co.id