ET80-150S-60 Housing Filter Cartridge SWRO

Kami adalah importir distributor agen dan supplier ET80-150S-60 Housing Filter Cartridge SWRO terlengkap menyediakan berbagai kebutuhan spare part water treatment untuk keperluan industri dengan kualitas dan harga terbaik

Penjelasan Singkat Housing Filter Cartridge

PROFILTER high flow FRP filter housing is designed for cartridge filters used in RO water treatment system. Our products are capable of building in high flow cartridge filters with sizes of 20", 40" and 60". Featured by easy installation and low maintenance cost, it has become the most popular design in the reverse osmosis system at home and abroad.

Compared with stainless steel filter housing, it is more resistant to strong-acid, strong base, bath solution, chlorine alkali, concentrate, landfill leachate and other special medium environment. High flow FRP filter housings are widely used in the applications of water pretreatment in membrane treatment system, electronics, electric power, metallurgy, chemical industry, food, beverage, brackish water, seawater desalination and separation of landfill leachate.

Feature

Advanced design for water pre-treatment.

High flow rate capacity in reverse osmosis system.

More resistant to corrosion than stainless steel.

Versatile for commercial and industrial applications.

Low operating and maintenance costs.

Test every FRP filter housing, not sampling.

PFI Filter Housing Model

PFI HF Series

Horizontal, multi-purpose industrial design and ASME “U” & “UM” code high flow cartridge filter housings.

Horizontal Orientation

Equivalent to 3M Cuno High Flow Filter Systems

Accepts multiple 40″ & 60″ High Flow cartridges

150psig (10.3bar) @ 400°F(204.4°C) design pressure

Vessels available in carbon or stainless steel 304 or 316 (other materials available)

PFI UF Series

NSF/ANSI 61 Certified Ultra Flow Cartridge Filter Housings

Vertical Ultra Flow multi-round industrial design and ASME code filter housings.

Accepts multiple Ultra Flow filter cartridges for high flow applications.

Available in 20″, 40″ and 60″ lengths.

NSF 61 certified for SS304 and SS316 materials.

Element flow inside out with excellent dirt holding capacity.

Designed for extended periods between filter change outs.

Up to 50% smaller housing profile compared to housings that accept 2.5″ OD cartridge filters.

Swing bolt closure allows for quick element change out.

PFI UFH Series

Horizontal Ultra Flow Cartridge Filter Housings

Horizontal Ultra Flow multi-round industrial design and ASME code filter housings

Accepts multiple Ultra Flow filter cartridges for high flow applications

Available in 20″, 40″ and 60″ lengths

Element flow inside out with excellent dirt holding capacity

Designed for extended periods between filter change outs

Up to 50% smaller housing profile compared to housings that accept 2.5″ OD cartridge filters

Swing bolt closure allows for quick element change out

Material of construction

Stainless Steel 304 or 316L

Inlet / Outlet

ANSI Flange is standard, others are optional

Closure

Bolt and Nut

Finishing

Outer – Polished or sand blast surface

Inner – Polished

Sealing

Silicone / Viton O-ring

Pressure

Maximum 1.0 Mpa

Continuous operating 0.7 Mpa

Cartridges

Can be design to suit Pall or 3M cartridges

Sealing

Silicone / Viton O-ring

Housing Type

Normally housing design in horizontal but can be design in vertical upon request

House Design

To suit 20”, 40”, 60” or other length cartridges

To fit 1 to 50 cartridges or more

Connections

Inlet and outlet sizes and directions can be custom made to suit different ment

Vent and drain sizes, types can be custom made also

Untuk permintaan penawaran ET80-150S-60 Housing Filter Cartridge SWRO silahkan hubungi

PT PROFILTER INDONESIA

Ruko Blok G/54 – Gudang A/01

Jl.Canadian Broadway

Kawasan Pergudangan Commpark – Kotawisata – Cibubur

Kantor : +6221 84937805 , 84937329

WhatsApp : +62 812-9634-0505

Email : sales@profilterindonesia.com